How to Properly Jump Start a Car

If your car doesn’t jump start because of a dead battery in the Little Rock-area, you owe it to yourself and your family to find out how to jump-start a car. Fortunately, the service technicians at Superior Dodge Chrysler Jeep Ram of Conway have broken down how to jump-start car batteries for your Chrysler, Dodge, Jeep, Ram car, truck, or SUV. Discover the proper way to jump-start a car with the experts below. Then, if you’re in need of a new battery, feel free to order remotely from our Conway Parts Center! 

How to Jump Start Your Car: Step-by-Step Guide

If your car doesn’t jump start on the side of a Benton road, there’s no need to worry. All you need to do is find another car and a set of jumper cables. You can also call a jump start car battery service if you have the time and money. Regardless of which method you opt for, once you’re prepared, follow the instructions outlined below: 

1. Park Working Car In Front of Car with Dead Battery: Park the car with a good battery facing the other vehicle, then make sure that the vehicle is turned off. Check to make sure both parking brakes are engaged.
2. Locate Batteries on Both Vehicles: Open both hoods and find their respective batteries. You may need to remove a plastic hood to expose the battery terminals.
3. Identify Negative and Positive Terminals: Identify the positive and negative terminals. Make sure they’re free of corrosion and thoroughly wiped down.
4. Connect Red Clamp to Dead Positive Post: Connect the red clamp to the positive post on the powerless battery.
5. Hook Other Red Clamp to Charged Positive Post: On the other end, hook the other red clamp to the positive terminal of the battery with the charge.
6. Hook Black Clamp to Charged Negative Post: Connect the black clamp to the negative post on the battery with the charge. 
7. Hook Other Black Clamp to Dead Car’s Frame: Finally, connect the final clamp to an unpainted metal surface on your car’s frame.
8. Start Charged Engine, then Dead Engine: After you’ve secured each clamp to its proper spots, start the engine of the vehicle with the good battery first, then the one with the dead battery.
9. Remove Jumper Cables in Reverse Order: Once the dead vehicle has been jump-started, carefully remove the jumper cables in reverse order, then shut off the car that was used to help jump-start the dead car.
10. Keep Engine Running on Your Car: Keep the engine running on the restarted vehicle for at least 10 minutes to ensure that the weak battery doesn’t die again right away.

Visit Superior Dodge Chrysler Jeep Ram of Conway for High-Quality Jump Start Car Service

Now that you’ve read our overview of how to properly jump start a car if you’re having trouble replacing your dead battery and need an extra hand, we’re here to help. Schedule service at Superior Dodge Chrysler Jeep Ram of Conway to get the assistance you need to bring your dead Chrysler, Dodge, Jeep, Ram vehicle back to life. Contacting us at our Service Center near North Little Rock is a responsible way to ensure your car, truck, or SUV continues running smoothly in the long run.